HP Engage Paper | 3⅛" Thermal Receipt Rolls HP Engage Paper | 3⅛" Thermal Receipt Rolls

HP Engage 3 1/8 inch thermal receipt rolls
HP Engage · Thermal receipt paper

HP Engage Receipt Paper

3⅛" (80mm) single-ply thermal rolls sized to fit the HP Engage POS printer — no ink, no ribbon. This printer also runs 2¼" (58mm) rolls. Pick your roll length below.

Roll length
Pack size
HP Engage Thermal Rolls
Case of 50 rolls · in stock
Add to Cart
Fit note (please read): This printer's OEM core is 1" (25mm) — wider than the 7/16" core our standard 3⅛" rolls wind on. We offer these as a fit-test; if the roll doesn't seat cleanly on the spindle, call us at 1-877-971-1010 and we'll sort the exact roll.

BPA & BPS free · sold by the case · Call 1-877-971-1010 for bulk pricing

Same-day shippingBPA & BPS freeSold by the caseReal human support · 1-877-971-1010
Two widths, one printer

The HP Engage runs 80mm and 58mm

The HP Engage takes 3⅛" (80mm) rolls and also accepts 2¼" (58mm) rolls. Match the roll to the width your machine is set up for.

Standard fit
80mm
3⅛"

The width sized and sold above (220', 230' and 275').

Narrow width
58mm
2¼"

Running 58mm? The printer takes 2¼" rolls — see our 2¼" thermal rolls.

Specifications

HP Engage roll specs

The receipt roll sized for the HP Engage, from the manufacturer's media spec.

SpecDetail
Roll width3⅛" (80mm) · also runs 2¼" (58mm)
Supported widths (OEM)80mm, 58mm
Media typeSingle-ply direct thermal (no ink or ribbon)
Roll lengths220', 230' and 275' (all 3⅛", Case of 50)
Roll core1" (25mm) OEM core — wider than our standard 7/16" core
Machine max roll diameter80mm — the 275' roll (76mm) fits with ~4mm to spare — a snug fit at the longest length
PackCase of 50 rolls
ChemistryBPA & BPS free
Compatibility

Made for the HP Engage

These 3⅛" (80mm) single-ply thermal rolls are cut for the HP Engage and fit most 80mm POS receipt printers that take the same roll. Not sure it's your machine? Call 1-877-971-1010 and we'll confirm the right roll.

Similar 80mm receipt printers:

HP Engage paper FAQ

Questions about HP Engage paper

What paper does the HP Engage use?
The HP Engage takes 3⅛" (80mm) single-ply direct thermal receipt rolls — no ink or ribbon. Our rolls wind on a 7/16" (11mm) core, while the HP Engage's OEM core is a wider 1" (25mm), so we offer these as a fit-test. We stock it in 220', 230' and 275' lengths, sold by the case of 50.
Can the HP Engage use 58mm paper too? +
Yes. The HP Engage runs 3⅛" (80mm) rolls and also accepts 2¼" (58mm) rolls. If you run 58mm, use our 2¼" thermal rolls instead of the 80mm rolls shown here.
Which roll length should I choose? +
All three lengths fit the same — it's about how often you want to change rolls. The 275' is the longest (fewest changes); 220' and 230' are the standard everyday lengths. Every length ships as a case of 50.
Will these rolls fit my HP Engage? +
The HP Engage uses a wider 1" (25mm) core than our standard 7/16" core, so we offer these 3⅛" rolls as a fit-test. Most setups seat fine; if yours doesn't, call 1-877-971-1010 and we'll match the exact roll.
Is this paper BPA free? +
Yes — our receipt rolls are made without BPA or BPS. They print with heat, so there's no ink, toner or ribbon to replace.
How many rolls come in a case? +
Case of 50 rolls. For larger volumes, call 1-877-971-1010 for bulk pricing.
Ready to stock up?

Get HP Engage paper on its way today.

Same-day dispatch on in-stock cases. Bulk pricing available.